Construcción de una base de segundo orden usando el método hot para elementos finitos triangulares con un lado curvo
DOI:
https://doi.org/10.22199/S07160917.1986.0012.00004Keywords:
integrales, isoparamétricosAbstract
En la construcción de funciones de base para elementos finitos curvos, el método isoparamétrico posee la ventaja de la simplicidad en la definición de la transformación y en el hecho de que las funciones de base construidas usando la transformación isoparamétrica son polinomios. Esto hace que las típicas integrales que deben ser calculadas por algún método numérico no representen un gran problema. Sin embargo, el método isoparamétrico es esencialmente de primer orden. Los métodos directos tienen la ventaja de ser capaces de aproximar la geometría de los lados curvos de los elementos finitos con mayor exactitud que el método isoparamétrico y las funciones de base construidas vía métodos directos, pueden ser de cualquier orden deseado.References
[1] GALLAGHER, R.H. Finite Elements Analysis. Prentice Hall, 1975.
[2] Mc LEOD, R.J.Y. Node Requirements for the High Orden Approximation Over Curved Finite Elements. J. Inst. Maths. Appl. 17(1976).
[3] Mc LEOD, R.J.Y. High Order Transformation Methods for Curved Finite Elements. J. Inst. Maths. Appl. 21(1978).
[4] Mc LEOD, R.J.Y. On the Stability of Two-Dimensional Interpolation and High Order Basis for Curved Finite Elements. Comp. and Math & with Appl. 5(1979).
[5] Mc LEOD, R.J. Y., MITCHELL, A.R. The Use of Parabolic Ares in Maching Curved Boundaries in the Finite Elements Method. J. Inst. Maths. Appl. 16(1975).
[6] MITCHELL, A.R., WAIT, R. The Finite Element Method in Partial Differential Equations. Wiley and Sons, 1977.
[7] ROJO, H.J. Basis Functions in Curved Finite Elements. Doctoral Dissertation. New Mexico State University, 1985.
[8] ROJO, H.J. Cantidad de Nodos Requeridos para Funciones de Base en Dos Dimensiones. Revista Proyecciones, Universidad del Norte, 1985.
[9] WACHPRESS, E.L. A Rational Finite Element Basis. Academic Press, 1975.
[2] Mc LEOD, R.J.Y. Node Requirements for the High Orden Approximation Over Curved Finite Elements. J. Inst. Maths. Appl. 17(1976).
[3] Mc LEOD, R.J.Y. High Order Transformation Methods for Curved Finite Elements. J. Inst. Maths. Appl. 21(1978).
[4] Mc LEOD, R.J.Y. On the Stability of Two-Dimensional Interpolation and High Order Basis for Curved Finite Elements. Comp. and Math & with Appl. 5(1979).
[5] Mc LEOD, R.J. Y., MITCHELL, A.R. The Use of Parabolic Ares in Maching Curved Boundaries in the Finite Elements Method. J. Inst. Maths. Appl. 16(1975).
[6] MITCHELL, A.R., WAIT, R. The Finite Element Method in Partial Differential Equations. Wiley and Sons, 1977.
[7] ROJO, H.J. Basis Functions in Curved Finite Elements. Doctoral Dissertation. New Mexico State University, 1985.
[8] ROJO, H.J. Cantidad de Nodos Requeridos para Funciones de Base en Dos Dimensiones. Revista Proyecciones, Universidad del Norte, 1985.
[9] WACHPRESS, E.L. A Rational Finite Element Basis. Academic Press, 1975.
Published
2018-03-28
How to Cite
[1]
Óscar L. Rojo Jeraldo, “Construcción de una base de segundo orden usando el método hot para elementos finitos triangulares con un lado curvo”, Proyecciones (Antofagasta, On line), vol. 5, no. 12, pp. 57-70, Mar. 2018.
Issue
Section
Artículos
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.